|
 300W~2kW
Wind Turbine Controller (for Battery
Charging Wind Power Systems)
 The wind turbine controller is
the 'heart' of the wind power system. The controller monitors wind speed
and direction allowing the turbine to automatically adjust its position
to make best advantage of the wind. The controller also conditions the
'raw' electricity produced into stable DC current required to charge
batteries or supply an inverter.
Before purchasing and using this controller, we suggest you ensure the
voltage and power is in line with the generator, also promise the DC
voltage of controller, batteries and inverter should be equal.
|
Model |
WTC-300W |
WTC -500W |
WTC -1KW |
WTC -2KW |
|
Dump loader power (W) |
300W |
500W |
1KW |
2KW |
|
Rated Battery voltage (V) |
24 |
24 |
48 |
120 |
|
Float charge voltage (V) |
30 |
30 |
60 |
150 |
|
Over voltage (V) |
30 |
30 |
60 |
150 |
|
Over charge resume voltage (V) |
28 |
28 |
56 |
140 |
|
Low Battery Voltage (V) |
21 |
21 |
42 |
105 |
|
Low Battery resume voltage (V) |
24 |
24 |
48 |
120 |
|
Display Method |
LCD |
|
Display Parameter |
Battery Voltage, Charging Current |
|
Working |
Continuous and intelligent |
|
Circumstance |
Temperature:-10℃~40℃
Humidity:
﹤85% |
|
Protection Type |
Pole-confusion protection, Automatic dump-load function |
|
Warranty |
3 Years |
3kW~20kW
Wind Turbine Controller
(for Both On- & off-Grid Wind Power Systems)
The controller for Liten Small Wind Turbine Generator ranging from
3KW~20KW are all intellectual Controller, which are adopted
microcomputer chip and various sensors (including anemoscope, dogvane,
RPM sensor, temperature sensor etc.) to achieve the functions of
control, protection and rectification for wind turbine generator
systems. The model (3kW, 5kW, 10kW,20kW) can be stetted though the
control panel. A set of dumploader is required to cooperate with the
certain controller..
 
|
